Test Data Manager

Expand all | Collapse all

Data masking option disabled in CA Portal manager

Jump to Best Answer
  • 1.  Data masking option disabled in CA Portal manager

    Posted 02-20-2019 10:46 AM

    Hi Team,

     

    After I login to the CA portal manager, under Data masking, the "Get Started" option is disabled and it is mentioned as "Fast Data Masker could not be found. Please ensure it is installed before using the Masking feature". Verified and confirmed that FDM is installed on the remote TDM server and it is functional. Not sure if there is anything else I need to check to enable this option.

     

    The version of CA Portal manager and FDM we are using is 4.7. Please let me know if you need any additional information from my end.

     

    Thanks

    Sethu



  • 2.  Re: Data masking option disabled in CA Portal manager
    Best Answer

    Broadcom Employee
    Posted 02-20-2019 12:36 PM

    Hi,

       So you installed FDM from the 4.7 install media onto the Portal server? If FDM is in the default location you should not need to make any changes.  If you installed into a differant directory you would need to edit this setting in the application.properties file:


    # Path to FastDataMasker installation
    tdmweb.TDMMaskingService.fdm.path=C:/Program Files/Grid-Tools/FastDataMasker/

     

      Hope this helps.

     

    Regrads

    Keith



  • 3.  Re: Data masking option disabled in CA Portal manager

    Posted 02-20-2019 04:39 PM

    Thank you so much, Keith. We made the changes and it helped resolved the issue. Thanks again.