DX NetOps

 View Only
  • 1.  Spectrum topology creation protocol

    Posted Oct 20, 2020 03:59 AM
    Hi

    Can anyone tell me what is the logic for topology creates on the spectrum?  what is the protocol they used? and as per the below screen capture, some devices and link getting amber colour anyone has an idea on this?


      
    Thank you,
    Uchira.


  • 2.  RE: Spectrum topology creation protocol

    Broadcom Employee
    Posted Oct 20, 2020 01:56 PM
    Uchira,

    For the connections, take a look at https://knowledge.broadcom.com/external/article?articleId=118641

    For the amber color, that indicates a resolved connection but the Live Link is not activated. https://techdocs.broadcom.com/us/en/ca-enterprise-software/it-operations-management/spectrum/10-4-2/managing-network/modeling-and-managing-your-it-infrastructure/modeling-your-network-manually/how-to-model-manually-in-the-universe-topology/add-network-devices-to-universe-topology-views/connections-pipes-between-modeled-devices/enable-or-disable-a-live-link.html

    Joe


  • 3.  RE: Spectrum topology creation protocol

    Posted Oct 21, 2020 03:34 AM
    Hi Joseph,

    Thanks for the response the article was helpful.

    Thanks,
    Uchira.


  • 4.  RE: Spectrum topology creation protocol

    Posted Oct 22, 2020 11:26 PM
    Hi Joseph,

    Do you have any idea about devices colour deferent some devices are a yellow colour and some are green? 

    Thanks,
    Uchira.


  • 5.  RE: Spectrum topology creation protocol

    Posted Oct 23, 2020 02:50 AM
    They have alarms asserted. Tap "alarms" for the specific view, to view they.