Hi Carlos,
Take a look the PM memory calculate:
http://serviceassurance.ca.com/im/Cisco ASR 9010Cisco MemoryVendor Certification: Cisco Memory
SNMP MIB Name: CISCO-MEMORY-POOL-MIB
Descriptions "MemoryPool " + ciscoMemoryPoolName + " " + ciscoMemoryPoolIndex
Free ciscoMemoryPoolFree
Indexes ciscoMemoryPoolIndex
LargestMemoryFree ciscoMemoryPoolLargestFree
Names "MemoryPool " + ciscoMemoryPoolName + " " + ciscoMemoryPoolIndex
Used ciscoMemoryPoolUsed
Utilization snmpProtectedDiv ((100.0 * ciscoMemoryPoolUsed), (ciscoMemoryPoolFree + ciscoMemoryPoolUsed))
Original Message:
Sent: 02-10-2020 04:05 PM
From: Carlos Hugo Martin Carranza Olivera
Subject: Cisco ASR 9010 Memory
Hi everyone,
I have the following doubt, the client has the Cisco ASR 9010 router, which in CA Spectrum shows 3 memories:
- Memory image -> 100%
- Memory processor -> 39%
- Memory reserved -> 100%
But in CA PM only one with the value of 79.71% is shown, which is the average.
The client indicates that the memory that should be considered is the "Memory processor".
I would like to know if someone has had the same situation and how it was solved.
Thanks in advance.