DX NetOps Manager

Expand all | Collapse all

Desactivate alarms on switch port access

Jump to Best Answer
  • 1.  Desactivate alarms on switch port access

    Posted 09-26-2018 10:35 AM

    Hello,

     

    I want to desactivate alarms on switch port access but I want alarms remains active on switch port trunk.

     

    In my SpectroServer there are about 1000 switchs.

     

    Currently, all ports are monitored

     

    Have you an idea ?

    Thanks in advance

     

    Jeremy



  • 2.  Re: Desactivate alarms on switch port access
    Best Answer

    Posted 09-26-2018 10:41 AM

    Hi Jeremy,

      You have a couple of options but the most widely used option is to create a global collection for ports that you do want to monitor and another collection for ports you do not want to monitor.  You can then use policy manager to use the livepipes policy to enable/disable the monitoring/alarming on the interfaces.

     

    There's a discussion here that should be able to get you going:

    enable live links between switches 

     

    Cheers

    Jay



  • 3.  Re: Desactivate alarms on switch port access

    Posted 09-28-2018 03:18 AM

    Hi Jason,

     

    Yes It's a good idea.

     

    Thank you very much.

     

    Jeremy