Symantec Privileged Access Management

  • Private Community
 View Only

  • 1.  Re-join Appliance to cluster

    Posted May 31, 2020 07:51 PM

    Dear Community, during the upgrade from 3.2.6 to 3.3.1 -> 3.3.2 one of my appliance was stuck during booting kernel screen for hours. So we decided to finish the upgrade by removing such appliance from the cluster. All is working fine, but now I need to re-join this new brand appliance back to Cluster.

    Considering all configuration, licenses, version are already the same, what would be the next steps to re-join this appliance to my cluster. Should I stop the cluster for that?

    Version 3.3.2
    Primary Site: 1 node (here is the site where the appliance will be joined)
    Secondary Site: 2 nodes

    Appreciate.

    Higor



    ------------------------------
    Security Analyst
    DXC Technology
    ------------------------------


  • 2.  RE: Re-join Appliance to cluster
    Best Answer

    Broadcom Employee
    Posted Jun 01, 2020 09:52 AM
    Read and follow: https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/layer7-privileged-access-management/privileged-access-manager/3-3-2/deploying/set-up-a-cluster/configure-a-cluster/add-a-cluster-member.html
    Original Message


  • 3.  RE: Re-join Appliance to cluster

    Posted Jun 01, 2020 09:56 AM

    Thanks,

     




    Original Message