CA Client Automation

 View Only
  • 1.  Bandwidth throttle setting in CA Client Automation r12.8

    Posted Jul 15, 2014 11:27 PM

    Hi all,

     

    I have question related to KB SAP Portal Services.

    1. what's "k" means? is it KByte or Kbit?

    2. What's conversion used for setting bandwidth in CA Client Automation? is written if value 0 then 512k is used. How if I put value 1,2,3,4, and so on, how "k" to be used for these values?

     

    thanks in advance



  • 2.  Re: Bandwidth throttle setting in CA Client Automation r12.8
    Best Answer

    Broadcom Employee
    Posted Jul 16, 2014 05:26 AM

    Hi

     

    In this doc K=KByte

     

    There is no conversion, If the value is 0 then we use a default value of 512K. If you define a specific value the we will use that as the Parcel Size. the value is in Bytes so if you define 1 then this is 1 Byte. you can define any value up to the maximum of 2147483647 Bytes

     

    Does this answer your query?

    Rich



  • 3.  Re: Bandwidth throttle setting in CA Client Automation r12.8

    Posted Jul 16, 2014 05:56 AM

    Hi Richard,

     

    Yes.

     

    thank you very much...



  • 4.  Re: Bandwidth throttle setting in CA Client Automation r12.8

    Broadcom Employee
    Posted Jul 16, 2014 06:24 AM

    great

     

    Can you mark the post as answered please.

     

    Glad I could help

    Rich



  • 5.  Re: Bandwidth throttle setting in CA Client Automation r12.8

    Posted Aug 04, 2014 06:47 AM

    Hi Richard,

     

    We have ES and DM 12.8 in our environment connecting to different remote mdb instances
    on same mdb box. We have installed CCS on ES. Now we want to use bandwidth
    throttling feature of CCS. For this, you had suggested us (Refer Case - 21813082) to achieve
    the required DTS controls on your DM you need to configure the DTS TOS on
    your DM to the DTS NOS of the EM. Could you please guide us where to configure this setting ?

    Also you suggested us to install event agent on DM and point to ES event
    console to get all events. We have installed agents like that but not getting
    any events. Need correct configuration guidance. Please help.


    I have opened a case to get help to configure this : 21888289-1: DTS TOS - DM & DTS NOS - ES , we need to use BW throttling feature of CCS which only installed on Enterprise Manager.

    Appreciate your help.


    Thanks,

    Nikhil Kalwint



  • 6.  Re: Bandwidth throttle setting in CA Client Automation r12.8

    Broadcom Employee
    Posted Jul 16, 2014 06:39 AM

    Hi,

     

    In future if you need more details regarding any configuration parameter, I would recommend you to use the F1 key after opening the parameter windows, which will

    provide more detailed information regarding the parameter.

     

    Regards,

    Samad