DX Infrastructure Management

Expand all | Collapse all

Agentless monitoring

Jump to Best Answer
  • 1.  Agentless monitoring

    Posted 12-13-2019 01:18 PM
    Hi Team,

    I want to monitor a server using remote host monitoring where I don't want to install any uim agent. I know there is a option of doing a agent less monitoring. Mine is a on-premise CA UIM running on 9.2. Could you let me know how to set up agent less monitoring so that I will get cpu,memory and Disk utilization.

    Thanks
    KR


  • 2.  RE: Agentless monitoring

    Posted 12-13-2019 01:23 PM
    have you reviewed the rsp probe?
    http://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/rsp-remote-system-probe.html

    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------



  • 3.  RE: Agentless monitoring

    Posted 12-13-2019 01:33 PM
    Hi Gene,

    Thank you so much for the reply. I have gone through, but a little doubt. I have a dedicated windows system running with agent installed and reporting to UIM. If i deploy the rsp probe and configure to monitor the remote systems, will it work?

    Thanks
    Kamal Rath


  • 4.  RE: Agentless monitoring
    Best Answer

    Posted 12-13-2019 01:39 PM
    As long as the RSP probe can connect to the target machine and has the correct rights it should work fine.

    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------