ESXI agent installation

[Nijin K]

Hi all 

can we install agents directly into V-centres since we want to directly monitor them.

if yes which agent version is supported 

please confirm

regards
nijin

[Alex Yasuda]

You can use the VMWARE probe:

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/ca-unified-infrastructure-management-probes/GA/alphabetical-probe-articles/vmware-vmware-monitoring/vmware-vmware-monitoring-release-notes.html

Probe Specific Environment Requirements

The probe supports monitoring for the following vSphere environments:

• v7.11 to 7.14: vSphere vCenter/ESXi 5.1U2 - 6.7
• v6.82 to 6.87: vSphere vCenter/ESXi 5.1U2 - 6.5
• v6.72: vSphere vCenter/ESXi 5.1U2 - 6.0U2
• v6.60: vSphere vCenter/ESXi 5.1U2 - 6.0U1
• v6.00 to v6.53: vSphere vCenter/ESXi 5.1U2 - 5.5
• v5.X: vSphere vCenter/ESXi 4.1U2 - 5.1U2

------------------------------
Technical Support Engineer
Broadcom
------------------------------

[Andrew Cooper]

Alex

Slightly off topic, but have you heard anything about ESXi (vSphere) 7 support?

Thanks, Andrew

------------------------------
Knows a little about UIM/DXim, AE, Automic
------------------------------

[Stephen Danseglio]

Hi Andrew,

VMWare Probe  VMware vSphere 7.0 certification is pending.

We have added the feature in our back log, but it shall be picked post Q3CY20.

We should be able to share the ETA during early Q4CY20. Feel free to check back with me then.

Steve

------------------------------
Support Engineer
Broadcom
US
------------------------------

[Andrew Cooper]

Ok thanks Steve

------------------------------
Knows a little about UIM/DXim, AE, Automic
------------------------------