not enough details
however based on the info supplied you are in the problem zone
Version 3.4x Software
The following minimum software versions on the primary hub:
CA Unified Infrastructure Management server version 8.51 SP1 or later
the snmpcollector log may be helpful
drnimbus (bin folder) can be used to see if there are any messages coming in from it.
filter on probe: pollagent
------------------------------
Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 08-21-2019 05:55 AM
From: Drisya Rajan
Subject: SNMPCollector _Not generating alarms/ QoS data
Hi All,
Could someone help on the below queries.
SNMPCollector probe configuration are getting saved for the metric families Response Path Test ICMP & Response Path Test TCP , but not generating report or alarms based on the configuration.
I am also getting output for "Run Vendor Certification Test".
Target Device make model : Cisco 6509
CAUIM version : 8.5
Probe : snmpcollector V3.44
DCD : 2.4
------------------------------
Thanks & Regards,
Drisya Rajan
------------------------------