DX Unified Infrastructure Management

 View Only
  • 1.  HA Probe

    Posted Jan 19, 2022 12:14 PM
    I am planning to have a secondary hub set up with the HA probe to go with my primary hub. I could not see anything in the documentation that defines what needs to be configured on the secondary hub with HA for it to communicate to the DB with the data_engine probe.

    Is it just a matter of importing the DB certificate onto the second hub?
    Thank you


  • 2.  RE: HA Probe
    Best Answer

    Broadcom Employee
    Posted Jan 19, 2022 12:18 PM
    Check out:
    Article Id: 10784
    AIOps - DX Infrastructure Manager - High Availability (HA) Guide (CA UIM)
    https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=10784


  • 3.  RE: HA Probe

    Posted Jan 27, 2022 02:17 AM
    Thank you for the link David, before I set it up there is no mention in the document of enabling TLS in the secondary hub install so I assume it is just a matter of copying the .jks file to this secondary hub and adding it during the installation phase.

    Also on my new primary hub, everything looks good when logged into Infrastructure Manager but in the hub log I am seeing these errors, any ideas on these please?;

    Jan 20 14:31:44:896 [1604] 0 hub: Disconnecting queue route 'alarm_enrichment' after failed attempt to send heartbeat

    Jan 20 14:31:45:883 [2440] 0 hub: Disconnecting queue route 'probeDiscovery' after failed attempt to send heartbeat

    Jan 20 14:31:45:883 [13020] 0 hub: Disconnecting queue route 'udm_inventory' after failed attempt to send heartbeat

    Jan 20 14:31:47:866 [14260] 0 hub: Disconnecting queue route 'action_manager' after failed attempt to send heartbeat

    Jan 20 14:31:47:866 [14940] 0 hub: Disconnecting queue route 'legacy_alarm_manager' after failed attempt to send heartbeat

    Jan 20 14:31:47:866 [4612] 0 hub: Disconnecting queue route 'event_manager' after failed attempt to send heartbeat

    Jan 20 14:31:47:866 [6624] 0 hub: Disconnecting queue route 'alarm_manager' after failed attempt to send heartbeat

    Jan 20 14:31:47:866 [14972] 0 hub: Disconnecting queue route 'qos_processor_qos_baseline' after failed attempt to send heartbeat

    Jan 20 14:31:48:851 [11996] 0 hub: Disconnecting queue route 't_3' after failed attempt to send heartbeat

    Jan 20 14:36:19:328 [10904] 0 hub: login [NimBUS] - wrong password user=administrator ip=xx.x.xx.xxx

    Jan 20 14:36:19:328 [10904] 0 hub: Login: failed for administrator, ip = xx.x.xx.xxx

    Jan 20 14:36:19:338 [10904] 0 hub: login [NimBUS] - wrong password user=administrator ip=xx.x.xx.xxx

    Jan 20 14:36:19:339 [10904] 0 hub: Login: failed for administrator, ip = xx.x.xx.xxx

    Jan 20 17:04:38:202 [10904] 0 hub: sec_bfa_locked_user: user cannot be empty

    Jan 20 17:04:38:202 [10904] 0 hub: login - denied; user  has too many login failures, try again in -1 seconds

    Jan 20 17:04:38:202 [10904] 0 hub: Login: failed for , ip = xx.x.xx.xxx

    Jan 20 17:04:38:212 [10904] 0 hub: sec_bfa_locked_user: user cannot be empty

    Jan 20 17:04:38:212 [10904] 0 hub: login - denied; user  has too many login failures, try again in -1 seconds

    Jan 20 17:04:38:212 [10904] 0 hub: Login: failed for , ip = xx.x.xx.xxx

    Jan 21 10:55:00:061 [10904] 0 hub: login [NimBUS] - wrong password user=administrator ip=xx.x.xx.xxx

    Jan 21 10:55:00:062 [10904] 0 hub: Login: failed for administrator, ip = xx.x.xx.xxx

    Jan 21 10:55:00:072 [10904] 0 hub: login [NimBUS] - wrong password user=administrator ip=xx.x.xx.xxx

    Jan 21 10:55:00:072 [10904] 0 hub: Login: failed for administrator, ip = xx.x.xx.xxx




  • 4.  RE: HA Probe

    Broadcom Employee
    Posted Jan 27, 2022 09:33 AM
    This was addressed in my reply sent to your private message sent the other day..


  • 5.  RE: HA Probe

    Posted Jan 27, 2022 10:45 AM
    Thanks David I posted this the day I asked you and you responded, not sure why it only got posted here 8 hours ago, apologies