greg
No these wintel servers are domain controller of our environment and these are getting synced with ntp servers running on unix os.
also other servers are getting synced usig these domain controller
so when we tried on a ntp probe on few servers it worked with host name of the server it self nothing was done from our side but on most of the servers we are getting same error not able to contact host
and i have checked that the ntp services are running on the server through nt services probe
also ntpsync is happening on the server i tested this probe
Original Message:
Sent: 02-25-2020 08:34 PM
From: GREGG STILLWELL
Subject: ntp_services probe giving
Hi Nijin,
Are you sure your running NTP Server on a windows box? Verify it is listening on the ntp port using the net_connect. Not sure off the top of my head which port that is, but it is listed in net_connect config.
Original Message:
Sent: 02-25-2020 05:24 PM
From: Nijin K
Subject: ntp_services probe giving
Original Message:
Sent: 02-25-2020 02:56 PM
From: David MICHEL
Subject: ntp_services probe giving
FIPS is not required.
FYI probes write to a log and log level and size can be increased to capture troubleshooting details.
Have checked out:
NTP_Response Error: unable to contact host
Article Id: 4163
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=4163
------------------------------
Support Engineer
Broadcom
Original Message:
Sent: 02-25-2020 09:40 AM
From: Gene HOWARD
Subject: ntp_services probe giving
NTP us a UDP connection so it is hard to test for and troubleshoot.
We will need more information to try and help you.
what is the version of the Wintel server
Is the NTP service the build-in windows service?
What version of NTP Service is being run?
Is the probe running on the same server or remote?
------------------------------
Gene Howard
Principal Support Engineer
Broadcom
Original Message:
Sent: 02-25-2020 09:22 AM
From: Nijin K
Subject: ntp_services probe giving
hi
i am trying to check ntp response parameters for a wintel server but getting error unable to connect host i have checked the pre-requisite
and the fips encryption is not activated which the client don't want to activate in security policy for probe version1.42
Also this issue is also occurring in probe version 1.41 which do not require fips encryption
so can anyone suggest why this error is occuring for wintel servers
------------------------------
regards
Nijin
------------------------------