DX Unified Infrastructure Management

  • Private Community
 View Only

  • 1.  AWS and alarm_enrichment probe

    Posted Jul 10, 2019 12:25 PM
    Just configuring the AWS probe and trying to configure EC2 instance CPU for 'Enable Static Time Over Threshold' and it says I need to install alarm_enrichment probe version 4.4 or greater. I have this on my primary hub version 9.06. Does this mean that the probe needs it on the local robot that has the AWS probe? I do not see the alarm_enrichment in my archive and I cannot find the online archive to get hold of the probe. ANy pointers please?

    Thank you


  • 2.  RE: AWS and alarm_enrichment probe
    Best Answer

    Posted Jul 10, 2019 05:01 PM
    alarm_enrichment version equals nas version.
    Best to use the latest revision that shows up as available in your archive.
    What version uim is this?
    If in doubt see:
    https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=9632

    also see:
    The Time Over Threshold Event Rule
    https://docops.ca.com/ca-unified-infrastructure-management-probes/ga/en/how-to-articles/the-time-over-threshold-event-rule

    but there are changes to this in uim 9.0.2 and greater

    ------------------------------
    Support Engineer
    Broadcom
    ------------------------------

    Original Message