DX Unified Infrastructure Management

 View Only
  • 1.  IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0

    Posted Jun 22, 2019 04:12 PM
    Had a fresh new 9.0.2 install with only Primary hub and UMP, it was working fine. Then ran SP1 on top on both. I notice the IM/AC response time is very slow after the SP was applied. Does anyone has any experience with SP1?


  • 2.  RE: IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0

    Posted Jun 24, 2019 04:10 AM
    Hi Paul,

    I had a similar experience with UMP/AC also with startup time of wasp (>20 min). It seems to be a problem with the wasp or tomcat 8. For this there is a KB article available:
    https://comm.support.ca.com/kb/why-is-wasp-so-slow-to-start-up-in-uim-v9-1-0/KB000132483

    I hope this helps.


  • 3.  RE: IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0
    Best Answer

    Broadcom Employee
    Posted Jun 24, 2019 07:49 AM
    This will be improved at 9.1.1 that will be available next month.

    For now, you can open a Support Ticket and request the files to test at your TEST environment if you had it:
    distsrv_9.1TF.zip
    hub_9.10_TF.zip
    robot_update_9.1TF.zip

    As as workaround, you can try to downgrade the HUB/controller version from primary hub from 9.1 to 7.97 and probably will help on IM/AC performance.

    ------------------------------
    Senior Support Engineer
    Broadcom
    ------------------------------



  • 4.  RE: IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0

    Broadcom Employee
    Posted Jun 27, 2019 08:17 PM
    Hey Alex, can you please share the build?

    distsrv_9.1TF.zip
    hub_9.10_TF.zip
    robot_update_9.1TF.zip

    Thank you!


    ------------------------------
    Support Engineer
    ------------------------------



  • 5.  RE: IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0

    Broadcom Employee
    Posted Jul 04, 2019 08:41 AM
    I've send you an email with the Test Fixes

    ------------------------------
    Senior Support Engineer
    Broadcom
    ------------------------------



  • 6.  RE: IM/AC GUIs are very slow after upgrade from 9.0.2 to 9.1.0

    Posted Jun 28, 2019 08:26 AM
    Is 9.1 still remaining on the downloads page ? I ask this question as our upgrade to 9.1 has rendered UIM not fit for purpose.