DX Infrastructure Management

Expand all | Collapse all

UIM Upgrade / 9.20 New install

Jump to Best Answer
  • 1.  UIM Upgrade / 9.20 New install

    Posted 11-29-2019 11:37 AM
    1:  I have 8.51 running in my environment. What are the steps required for upgrade to 9.20 , need process in detail. How to upgrade it to 9.02 and then 9,20

    2: What if i want to build a whole new primary HA and DB servers with directly downloading 9.20? need some proper documentation , and what things we would be required to upgrade on tunnel hubs.?

    ------------------------------
    System Analyst
    DXC Technology
    ------------------------------


  • 2.  RE: UIM Upgrade / 9.20 New install
    Best Answer

    Posted 12-02-2019 09:46 AM
    Please see the 9.02 upgrade guide
    https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/upgrading.html

    then see the 9.20 upgrade guide.
    https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/upgrading.html

    if you want to set up a new install follow the installation guide for 9.02
    https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/installing.html

    See the below KB article on moving hubs and robots to new domain.
    https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=34311

    ------------------------------
    Gene Howard
    Principal Support Engineer
    Broadcom
    ------------------------------