by default the ump robot has cdm, controller, hdb, spooler, wasp, so yes wasp is the only one.
Since your environment is non standard, can't say if there would be anything else.
This can be checked via viewing the probe raw configure or cfg.
cfg via ctrl+n in IM, or menu option in AC.
------------------------------
Support Engineer
Broadcom
------------------------------
Original Message:
Sent: 11-18-2020 09:57 AM
From: Michael Hughes
Subject: 8.5.1 to 9.0.2 Upgrade
Cheers David, I was asking other that the UMP WASP config is the discovery_server location reference anywhere else in any other probes?
Original Message:
Sent: 11-18-2020 09:38 AM
From: David MICHEL
Subject: 8.5.1 to 9.0.2 Upgrade
Yes the installer deploys discovery_server to the primary hub, no comment on a non standard setup where the primary hub doesn't have discovery_server.
Yes wasp has a <ump_common> that provides the address to probes at the primary hub, and that's only for wasp.
------------------------------
Support Engineer
Broadcom
Original Message:
Sent: 11-17-2020 02:50 PM
From: David MICHEL
Subject: 8.5.1 to 9.0.2 Upgrade
shut things down and take a snapshot of primary hub, ump & cabi robots, system hosting uim db
run the installer providing all the same info as what's currently there.
------------------------------
Support Engineer
Broadcom
Original Message:
Sent: 11-17-2020 04:39 AM
From: Michael Hughes
Subject: 8.5.1 to 9.0.2 Upgrade
We are upgrading from 8.5.1 to 9.0.2 but the current MGMT Server does not have the ZeroG registry file in C:\Program Files (x86) as UIM wasn't originally installed on this Server.
Does anyone know what the best approach is to upgrade to 9.0.2 without this?