How do you get clear cluster alerts ?

[Daniel Blanco]

So 2 a cluster alerts based on cdm hit our console saying c:\clusterstorage\volume1 is gone. 
Checked CDM probe and there is no reference to c:\clusterstorage\volume1  in Status tab \ Disk Usage,
nor is there anything in the cdm Setup Tab > Cluster Tab.

I opened the Cluster probe and there are no profiles setup on the cdm probe. 

So how do I clear this out and get rid of these? I already tried restarting the cdm probe(s), cluster probe and the robot(s) yet alert count still is increasing.

Alarm:

TIA...

------------------------------
Daniel Blanco
Enterprise Tools Team Architect
[e-mail]
------------------------------

[David Michel]

uninstall cdm, setup cluster, and then deploy cdm, it should auto sync up with cluster. 
This may help:
How to install and configure UIM probes for cluster monitoring
Article Id: 113187
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=113187

------------------------------
Support Engineer
Broadcom
------------------------------

[Daniel Blanco]

Hi Dave,
This was already setup with this procedure. I'm now looking to figure out how do you clear these alerts.

------------------------------
Daniel Blanco
Enterprise Tools Team Architect
[e-mail]
------------------------------

[David Michel]

" opened the Cluster probe and there are no profiles setup on the cdm probe"
Been some time since working with cluster but seems to me a profile for all the monitoring probes should be at the cluster probe, and since it is not the supposition is a problem with the initial setup and hence the recommendation to set it up again. So will have to differ to someone with more experience with cluster. 

------------------------------
Support Engineer
Broadcom
------------------------------