DX Unified Infrastructure Management

  • Private Community
 View Only

  • 1.  Metrics not working

    Posted Sep 04, 2020 07:12 PM

    Hello Guys,​I installed a new hub and also added a host to the hub to monitor.
    With CDM probe installed on both the hub and the host under it, I am not seeing any metrics at all.
    Where can I check if something is wrong?

    Thanks for all your helpful suggestions..

    ------------------------------
    Thanks
    ------------------------------


  • 2.  RE: Metrics not working
    Best Answer

    Posted Sep 05, 2020 02:07 AM
    Did you define a GET queue on your primary hub to get the qos metrics from your new hub?
    https://community.broadcom.com/enterprisesoftware/communities/community-home/digestviewer/viewthread?MessageKey=4c0b3a91-b182-4f5a-8840-3de76be35c9e
    You can monitor the qos metrics and alarm flow by selecting your new hub via IM config and select the status tab.  There you can see if you have queues that have queued values > 0 and are not having a value in "sent"
    Original Message


  • 3.  RE: Metrics not working

    Posted Sep 09, 2020 06:36 PM
    ​Thank you. It helped me to resolve the issue.

    ------------------------------
    Thanks
    ------------------------------

    Original Message