UIM UPGRADE in PRIMARY HA HUB

[ca support]

Hi All,

ThisPrimary UIM HUB
Secondary UIM HUB(HA PROBE-version 1.45)
UMP1/UMP2 -connected to PRIMARY UIM
UMP1- connected to Secondary UIM
ONE standalone MSSQL DB server which is connected to PRIMARY UIM/UIM HA(in case of PRIMARY failure)

To upgrade the HA PRIMARY hub

1)Stop the primary UIM, fail over to HA UIM hub and run the Primary installer
                      (or)
 
2)in HA UIM Upgrade only the hub and probe versions as same as the Primary

Please suggest Which one is the correct option?

If I go with the first option, i would have upgraded the Primary UIM server which connects the DB server , next when I upgrade the HA server with the same DB will there be any issue in the DB level?

Or upgrading the probe , hub and robot would be enough in HA Primary hub.

Regards,
Usha

[Franklin Ravi D'souza]

Hi 

Option 2 for HA hub upgrade 
For HA hub upgrade you don't run the installer again , you need to deploy probes manually

also pls refer

UIM HA Hub Upgrade
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=111156

UIM HA upgrade question
https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=111867

[ca support]

Thank you Franklin.That helps.

Also we are using two UMP servers connected to primary hub, using HA proxy for load balancing.

So to upgrade these UMP servers can I follow the below link, or any changes required

https://techdocs.broadcom.com/content/broadcom/techdocs/us/en/ca-enterprise-software/it-operations-management/unified-infrastructure-management/9-0-2/upgrading/ca-uim-upgrade-step-3-deploy-the-upgrade/upgrade-ump/upgrade-a-multiple-ump-configuration.html

Regards,
Usha

[Franklin Ravi D'souza]

Hi Usha,

Yes that's the correct link for multi -ump upgrade process