DX Infrastructure Management

Expand all | Collapse all

After UIM 9.0.2 Upgrade forwarded Trap Messages have ASCI Symbols in message?

  • 1.  After UIM 9.0.2 Upgrade forwarded Trap Messages have ASCI Symbols in message?

    Posted 02-12-2019 08:28 AM

    We have upgraded to UIM 9.0.2 and left our UIM 8.5.1 environment up at this time for reporting. The robot/probe on the old system that has the SNMPTD probe on it is still receiving traps and then the nas is forwarding the messages to the new 9.0.2 server. We seem to be getting strange symbols/ ASCI characters in the messages when the new system actually gets the alarm and puts it on the alarm console.

     

    When the alarm is first received by the old 8.5.1 SNMPTD probe the messages display fine but then the nas is forwarding it and sometimes it displays properly other times it displays ASCI characters in the messages and only some of the message? Any idea what would be causing this?



  • 2.  Re: After UIM 9.0.2 Upgrade forwarded Trap Messages have ASCI Symbols in message?

    Posted 02-14-2019 07:53 AM

    Hello Robert,

     

    Please open a Support Ticket for further troubleshooting

     

    Kind Regards,


    Alex Yasuda
    Sr. Support Engineer

    Broadcom Enterprise Software Division



  • 3.  Re: After UIM 9.0.2 Upgrade forwarded Trap Messages have ASCI Symbols in message?

    Posted 02-20-2019 10:07 AM