DX Infrastructure Management

Expand all | Collapse all

NTServices

Jump to Best Answer
  • 1.  NTServices

    Posted 05-05-2017 09:16 AM

    Hi Team,

    How to configure the NTservices probe template so it should pick all automatic services under monitoring and create profile for all.

     

    Thanks



  • 2.  Re: NTServices

    Posted 05-05-2017 11:31 AM

    Are you planning to monitor all the services in a server ?



  • 3.  Re: NTServices

    Posted 05-05-2017 10:37 PM

    Yes but with automatic categories only.

     

     

     

    Regards

    Sachin Gujar

    +91 8376904536

    Sent from my Samsung Galaxy smartphone.



  • 4.  RE: Re: NTServices

    Posted 11 days ago
    Hi 

    Please check this with newer versions of the ntservices probe in case using older 

    https://ca-broadcom.wolkenservicedesk.com/external/article?articleId=35706

    https://docops.ca.com/ca-unified-infrastructure-management-probes/ga/en/alphabetical-probe-articles/ntservices-microsoft-windows-nt-services-monitoring/ntservices-microsoft-windows-nt-services-monitoring-release-notes


  • 5.  Re: NTServices
    Best Answer

    Posted 05-07-2017 07:42 PM

    Before you  deploy the ntservices probe to a robot, update the below parameters in the .cfx file 

     

    delete_profile_section = yes

     

    and update the below as needed 

     

    <default>
    active = automatic
    action = report
    severity = major
    subsystem = 1.1.2.1
    alarm_on_action = yes
    qos = no
    </default>

     

    deploy the probe and it will start monitoring all the services which are set to automatic



  • 6.  RE: Re: NTServices

    Posted 11 days ago
    Hellow Phani,

    It doesnt work :(


  • 7.  RE: Re: NTServices

    Posted 11 days ago
    Hello Phani,

    Its not working :( ..