DX Infrastructure Manager

Expand all | Collapse all

How to configure storm protection on a hub spooler

Jump to Best Answer
  • 1.  How to configure storm protection on a hub spooler

    Posted 05-09-2017 10:46 AM

    Hi, I have a question regarding the spooler storm protection.

     

    So on each robot's spooler we can setup a storm protection by configurating the spooler probe. How does it work when we need to have the same kind of protecting on a hub? The spooler configuration on a hub is disable and have to be made from the hub configuration dialog, but I can't fond any storm protection in the hub configuration...

     

    Thanks for your help

     

    Dave



  • 2.  Re: How to configure storm protection on a hub spooler
    Best Answer

    Posted 05-09-2017 01:25 PM

    I had the same concern and pursued this via support.

     

    The result was that it is not possible to so this.When the hub probe is installed and running, the spooler is disabled. And the storm protection in the spooler is not duplicated in function within the hub probe.

     

    The only "work around" is to have a second machine to be a dedicated hub only. Or maybe do a second infrastructure install on the same server - one a hub and the other a robot. Cumbersome but it should work.

     

    -Garin