DX Unified Infrastructure Management

 View Only
  • 1.  which h3g modem for smsgtw ?

    Posted Feb 11, 2015 12:07 PM

    Hi,

    I have ca uim 8.0 installed  on a phisical and on a virtual server. Which h3g modem is supported by the probe? at the moment we have huawuei usb modem connected on the phisical server, it is recognize by windows 2008 r2 server but the probe isn't communicating. On the virtuale server we tryed to use digi anywhere usb with huawei modem but again with no success. So what are the supported modem for ca uim? What can I do if I have only a virtual server with no phisical ports?

    thank you



  • 2.  Re: which h3g modem for smsgtw ?

    Posted Feb 11, 2015 02:05 PM

    I know we've used Moxa serial to ethernet adapters to use SMS modems on virtual machines. I'm likely going to use this in the future as well.

     

    -jon



  • 3.  Re: which h3g modem for smsgtw ?

    Posted Feb 11, 2015 07:04 PM
      |   view attached

    Hello,

     

    Please review the smsgtw probe documentation:

     

    For Nimsoft 7.6 and before: http://docs.nimsoft.com/prodhelp/en_US/Probes/Catalog/smsgtw/3.1/index.htm

     

    For UIM 8.0 and later: https://wiki.ca.com/display/UIMPGA/v3.1+smsgtw+-+Infrastructure+Manager

     

    I've also attached a note with additional information about the Multi-Tech GSM Modem recommended for use with the smsgtw probe.

     

    Hope this helps,

    Charlie

    Attachment(s)

    pdf
    DOC-231149879.pdf   12 KB 1 version


  • 4.  Re: which h3g modem for smsgtw ?

    Posted Feb 12, 2015 01:28 PM

    ok but, what if my hub is virtual?

    how can i connect those modem?

     



  • 5.  Re: which h3g modem for smsgtw ?

    Posted Feb 12, 2015 04:07 PM

    Maybe you should re-read jonhcw's post.

     

    TL;DR: http://www.moxa.com/product/Serial_Device_Servers.htm