AppWorx, Dollar Universe and Sysload Community

 View Only

$Universe v5.33 Calculator Engine will not restart / Impossible de redémarrer l'Automate Calculateur sur un noeud v5.33

  • 1.  $Universe v5.33 Calculator Engine will not restart / Impossible de redémarrer l'Automate Calculateur sur un noeud v5.33

    Posted Dec 09, 2019 05:01 AM
    Hello all,

    For a couple of days, the Calculator Engine on a v5.33 $Universe node has stopped and would not restart.
    We have tried to wake or start the engine with command line of in Univiewer but neither method has worked. The engine would start, then would stop right away.

    Every engine of the 2 activated areas on that node can be stopped/ started with the proper command line except for the Calculator of area X
    Whenever we try and start the engine, we can find the following message in the $UXLOG/<COMPANY>_CALX.LOG file reading:

    Starting on area : X
    *** glibc detected *** ./uxcal: free(): invalid next size (normal): 0x080e1558 ***


    We have also tried to shut the node down, run a reorganization, restart the node,
    reboot the server,

    None of the above solutions has worked so far.


    Any feed back, experience on similar troubles, or suggestion will be most welcome,

    Thanks in advance,

    Toni

    ================================================================

    Bonjour à tous,

    Depuis quelques jours, nous avons le Calculateur de l'espace X d'un noeud $Universe en v5.33 s'est arrêté et refuse de redémarrer.
    Nous avons essayé de le redémarrer via ligne de commande ou dans l'interface graphique Univeiwer, mais sans sucès.

    Tous les autres automates des deux espaces actifs sur ce noeud peuvent être arrêtés / démarrés sauf celui ci.
    Et à chaque tentative nous obtenons le message suivant dans un fichier $/UXLOG/<COMPANY>_CALX.LOG:

    Starting on area : X
    *** glibc detected *** ./uxcal: free(): invalid next size (normal): 0x080e1558 ***

    Un arrêt de la société, réorg à froid, relance n'ont pas résolu le problème, ni un reboot du serveur

    Si vous avez des suggestions, des idées, des retour d'éxpérience similiares, ils seront les bienvenus
    Merci d'avance,

    Toni