DX NetOps

 View Only
  • 1.  CA PM Interface matrix not supported

    Posted 13 days ago

    After discovering switch interface matrix is not supported, also tried to update the matric family but not successful, how to resolved this issue.



  • 2.  RE: CA PM Interface matrix not supported

    Posted 12 days ago

    I would try to see if the device is responding correctly to SNMP requests related with IF-MIB. Check to see if you can query the devices from the DC on ifAlias. If it is successful, you should enable debug for the SNMP communication for the device in case and check the results. 



    ------------------------------
    Cătălin Fărcășanu
    Senior Consultant
    SolvIT Networks
    ------------------------------