IT Process Automation

How to determine hardware requirements - CA Process Automation 

Jul 23, 2015 01:09 PM

This document was generated from the following discussion: How to determine hardware requirements answered by Michael Niebuhr - MWNiebuhr

 

---------------------------------------

Is there any guide how to determine correct HW requirements of PAM installation? I've found only minimum HW requirements in Installation Guide.

 

So far we are using PAM processes that do some actions and job is done after a few seconds. Using this usage model we can handle thousands of PAM processes  without problem during a day.  Now we need to create also PAM processes that contain approval user task. Such user task can wait for a user interaction for a few days. Because of our users number I expect thousands maybe tens of thousands of such PAM processes waiting for user interaction. These PAM processes are in "Waiting" state. Is there some big differences in resource consuming between "Running" and "Waiting" status? How to determine correct HW requirements?

Thank you,

Milan

 

It is very difficult to give you a guide as to the amount of hardware you are going to need to power your Process Automation engine.  As a development tool, Process Automation's hardware footprint will be very much dependent on what you develop within it.

 

In the Support team we generally recommend a 2 PAM node cluster installed on a Server with at least 8GB of memory and 4 CPU on each as a solid starting point for a Production environment.

 

This should be able to handle a relatively decent load, provides load balancing and failover capabilities, and will work for a large part of our customer base.

 

But we also have clients that are pushing the limits of a 4 node cluster.  In general these clients have a large number of instances in non-completed states waiting for interaction from an end user in a task, or for some external action to be completed.

 

Every non-complete, actively running instance in PAM has a memory footprint and takes up at least a small amount of CPU cycles for PAM to maintain that instances current state in preparation for it to move onto the next state.

 

Waiting instances have a smaller memory footprint than actively running instances, but again that footprint is largely dependent on what the instance is designed to do.  If it is a small process that is just waiting for an approval task, you may find that you can easily have ten thousand of them waiting in a 2 node environment; if they are very large complex instances that are waiting then a 2 node cluster may not be up to the task.

 

PAM has a number of wait to help keep the number of actively running instances down.  For example you could have a very small process that is the waiting instance for the task that then takes the feedback from the task once it is completed, and launches the much more complex process to complete the work.

 

You could engage a Services Architect, who could review your process definitions, assist in their design, and review both current and future requirements to make more specific hardware recommendations; but it may be as easy to load up your test environment with this newly designed process and see how well it performs and make adjustments and add clustered nodes is necessary.

 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

CA Process Automation r4.1 components have the minimum hardware requirements described in this article.

Note: The configurations can be for physical and virtual machines.

Orchestrator

  • Server class hardware running multiple CPUs or multiple core CPUs
  • 4 GB RAM
  • Minimum 40 GB free disk space
  • Minimum 100 Mbps network connection (1000 Mbps recommended)

Agent

  • Host capable of running a supported OS
  • 2 GB RAM
  • 4 GB disk space

Database Server

See vendor specifications. Additional storage as required for the databases being hosted.

Note: CA Technologies recommends a minimum of 40 GB for your databases.

Reference:

CA Process Automation Cookbook

 

 

CA Process Automation 4.2 SP2 - Install Guide - Brazilian Portuguese Screenshots

CA PAM - Database teste fail - O teste não foi concluído com êxito. Verifique as configurações de banco de dados.

CA IT PAM Log Files - Where can i find PAM Log Files

PAM 4.3 Hotfix 01

How to create the Process? - Script to create a new user windows - CA IT PAM - Process Automation

Service Desk Manager 14.1 - 15 days Implementation 

 

Was this information helpful? Give your feedback.

Statistics
0 Favorited
6 Views
0 Files
0 Shares
0 Downloads

Related Entries and Links

No Related Resource entered.