DX Infrastructure Manager

Expand all | Collapse all

Use 2 lookup_by_alarm_field nas: alarm_enrichment rule

  • 1.  Use 2 lookup_by_alarm_field nas: alarm_enrichment rule

    Posted 03-22-2019 06:21 PM

    Hi all

     

    I am capturing the field "IfAlias" for the alarms from snmpcollector. This field I need to place on the alarms of snmpcollector

     

    The query that I am used for capturing IfAlias is ---->

     

    On this query I hope capture cmd.dev.name = source and S_QOS_DATA.target = Interface to place on the alarm snmpcollector the IfAlias

     

    This is the field (udata.values.source) for find the source:

     

    And this is the field (udata.values.target) for find the interface:

     

    And I need add on the same rule the lookup for interface, because the search needing source and the interface

     

    I have on the nas and alarm_enrichment for get the source ---->

     

    How can I add to the find the "source" and the "target" with this look up, in the same rule?

    udata.values.source

    udata.values.target



  • 2.  Re: Use 2 lookup_by_alarm_field nas: alarm_enrichment rule

    Posted 03-26-2019 05:44 PM

    Hi danst04

    Can you help me with this ? I know that you wrote an article of this procedure. Check out 'Use 2 lookup_by_alarm_field nas: alarm_enrichment rule' in CA Communities.



  • 3.  Re: Use 2 lookup_by_alarm_field nas: alarm_enrichment rule

    Posted 03-27-2019 08:23 AM

    Please open a support case and ask for it to be assigned to me.

     

    Regards,

    Steve



  • 4.  Re: Use 2 lookup_by_alarm_field nas: alarm_enrichment rule

    Posted 03-27-2019 12:04 PM

    Thanks for you help Stephen, this is the number ticket 01331487