DX Infrastructure Manager

Expand all | Collapse all

net_connect probe high response alarm value

  • 1.  net_connect probe high response alarm value

    Posted 05-08-2019 10:45 AM

    I have configured 500 profile in net_connect probe and now its generating huge amount of high response alarm for network devices .

    Configured total pkt sent 20, time delay  15sec,  interval = 5min

     

    What value is sent in high response alarm average of 10pkt or highest value of any pkt ?

     

    If its sending highest value out of 10 configured pkt then how I need to configured the Average value ?

     

    configuration
    active = yes
    QoS = yes
    ping = yes
    interval = 5min
    hostname = SW-01.gphone.com
    ip = 10.7.47.9
    timeout = 2
    failures = 1
    retries = 3
    dynamic_ip_monitoring = no
    qos_source = 0
    source = 1
    target = 0
    icmp_size = 0
    flags = 1
    group = Network Devices
    IPLongValue = 168242953
    alarm = 3
    icmp_threshold = 100
    alarm_on_packet_loss = yes
    packets_to_send = 20
    max_packets_lost = 2
    qos_on_packets_lost = yes
    delay_between_packet_to_send = 15000
    qos_on_packets_jitter = Yes
    qos_on_packets_latency = Yes
    max_jitter = 400
    alarm_on_jitter = 1

      

     

    What is the best configuration for net_connecte prove . I need to monitor only high response & pkt lost and ping filed .



  • 2.  Re: net_connect probe high response alarm value

    Posted 05-09-2019 01:10 PM

    Any one have idea about the above question ?