Automic Workload Automation

Expand all | Collapse all

Explanation of error message U0029007 Not all blocks (Limit '120') have been transferred

  • 1.  Explanation of error message U0029007 Not all blocks (Limit '120') have been transferred

    Posted 09-26-2016 11:14 AM
    I have found that many customers face this error message and i would like to share a description of the underlying issue. 

    Detailed Description and Symptoms
    The following message is found in the Messages window:
    U0029007 Not all blocks (Limit '120') have been transferred from file 'A806.UC4.TEMP.OAADERTG.TXT'.

    Investigation
    By default, Automic will only return about 960,000 bytes of a job report. This protects Automic from a runaway job that produces a huge output, possible due to an error, or a core dump returned as a job report and stored in the Automic database. The output is retained on the system where the job was executed.
    The 2 variables that control this are stored in the UC_HOSTCHAR_DEFAULT in client 00. They are MAX_REPORT_SIZE and REPORT_BLKSIZE. MAX_REPORT_SIZE is the number of blocks, specified in REPORT_BLKSIZE, that are transferred back to the Automic database.
    The message you are getting indicates that a job with an output greater that the maximum was processed and not returned to Automic. Check the output on the respective system for the job report/output. There is no problem here from the Automic perspective

    Solution
    If you frequently have job reports that are larger than the default and do not indicate a problem, and you want all of the data stored in Automic, then adjust either or both parameters previously listed to accommodate the reports.
    Edit the variable UC_HOSTCHAR_DEFAULT in client 0.
    Adjust the Validity Keywords MAX_REPORT_SIZE or REPORT_BLKSIZE (or both) to a larger Value.
    MAX_REPORT_SIZE has an acceptable range of 1-10000 (default 120) blocks
    REPORT_BLKSIZE has an acceptable range of 1-8000 (default 8000) bytes
    Otherwise you can set these values temporarily by the specific agent in the agent properties.


  • 2.  Explanation of error message U0029007 Not all blocks (Limit '120') have been transferred

    Posted 09-28-2016 03:44 AM
    Many thanks for this explanationIris_Muttenthaler_7233 I sometime got this error and wondered how I can get rid of this.