Layer7 Privileged Access Management

Expand all | Collapse all

SNMP Trap Sender Address

Jump to Best Answer
  • 1.  SNMP Trap Sender Address

    Posted 02-21-2018 06:45 AM
      |   view attached

    in my PAM, Version 3.1.1, I have enable SNMP trap Server.

     

    I'm able to receive the trap on the server but the source IP Address is: 10.0.0.1 (and random from my public IP), but my PAM has another IP address.

     

    Where I can configure the exact source address?



  • 2.  Re: SNMP Trap Sender Address
    Best Answer

    Posted 03-01-2018 06:21 PM

    Hi Emanuele, Sorry for the late response. There is no configuration for the trap server address. The source IP is part of the IPV4 protocol. Do you have a 10.0.0.1 gateway or router that doesn't just pass the network traffic through but establishes it's own connection to your trap receiver?



  • 3.  Re: SNMP Trap Sender Address

    Posted 03-02-2018 05:36 AM

    the only one device with 10.0.0.1 IP address is my gateway (on WAN configuration) but the connection from PAM to SNMP Server don't flow trought the gateway because is internal traffic.