DX Infrastructure Manager

Expand all | Collapse all

ACLs to allow access to Admin Console

  • 1.  ACLs to allow access to Admin Console

    Posted 05-03-2017 09:59 AM

    Hello,

     

    I'm trying to setup some accounts and users on UMP (Portlet Configuration -> Accounts), so that some of them can also access the Admin Console.

    Does anyone know which ACL properties must me activated to allow a UMP user to access the Admin Console?

    I've tried a few. For example:

    - Probe Basic

    - Probe Configuration

     

    I've added these to the Operator ACL, but when tring to access Admin Console, an error comes up on the screen:

    "Unable to sign in. Additional setup is required. Please contact your system administrator."

     

    Only Administrator ACL seems to be able to access the AC.

     

    Thanks.



  • 2.  Re: ACLs to allow access to Admin Console



  • 3.  Re: ACLs to allow access to Admin Console

    Posted 05-04-2017 12:42 PM

    Hi Phani,

    Thanks for your reply.

    However, even after I enabled all the ACLs described on the document you sent, I am still getting the same error message...

    Have you been successful in configuring access to other users other than those with Administration Account?

     

    Thanks



  • 4.  Re: ACLs to allow access to Admin Console

    Posted 05-04-2017 07:55 PM

    I just tried setting up an ACL with only the permissions listed in the document and assign it to a user . I was able to login to Admin Console .

     

    Just a note, its Admin Console 2 and not the older one. I remember I was trying to do something similar with the older version a while back and was not successful, this might be something available with the new AC2. 

     

    Which one are you using?  



  • 5.  Re: ACLs to allow access to Admin Console

    Posted 05-05-2017 05:36 AM

    I'm using WASP probe version 8.50, so I believe it's already AC2 (which has been released with UIM 8.4.7, as far as I could figure out).

    Do you have only WASP probe deployed on your UMP robot, or are you using other probes that may add other features to it?

     

    Thanks.



  • 6.  Re: ACLs to allow access to Admin Console

    Posted 05-07-2017 08:01 PM

    I am on 8.4.7 and yes its a default configuration..nothing special . Just make sure you applied all the needed ACL's

     

    The user I have applied the ACL belongs to a specific customer account 



  • 7.  Re: ACLs to allow access to Admin Console

    Posted 05-08-2017 05:45 AM

    I believe Account User with Administrator ACL would be enough.

    Regards,

    Yu Ishitani



  • 8.  Re: ACLs to allow access to Admin Console

    Posted 07-19-2017 11:38 PM

    We are investigating this the cause of the problem at CASE #00741787.

    ACL is not the cause. We are suspecting origin facilitator (hub or robot) is related.

    I will post once I find something.