Why does DCMT D ALL STORAGE POOLS show two entries for storage pool 255?
The command DCMT D ALL STORAGE POOLS and the Performance Monitor PMRM Storage Pool Detail screen shows two entries for storage pool 255.
The first entry is the size specified in the SYSGEN in the XA STORAGE POOL IS clause of the SYSTEM statement. The second entry shows as being 100% full.
What causes multiple storage pool 255 to be built?
The extra storage pool 255 is there by design, this is not a problem. The extra storage pool 255 is used to hold the DMCL.
It is allocated before startup reads the system definition from the dictionary. IDMS does not know how big the pool 255 should be so it allocates it a default size of 32MB. It's size can be controlled by SYSIDMS parameter CV_STARTUP_XA_REGION_MB. You only need to specify this parameter if your DMCL is very large. After startup any extra storage in this pool is released so it will always show as being 100% full.
This extra storage pool 255 is considered a dynamic extension of the storage pool 255 defined in the SYSGEN (its SCT control block will have the SCTDYNA flag set).
Storage Pool Detail (PF9) - CA IDMS - 19.0 - CA Technologies Documentation
If you have a 3rd party package (or in-house app) that monitors storage pool % free and considers a storage pool > 99% full an exception – be aware that the above mentioned condition will trigger that exception
Technology Architect, Database Infrastructure Services
Technology Solution Services
123 East Main Street
Louisville, KY 40202
(502) 476-2538 or 407-7266