Layer7 Privileged Access Management

Expand all | Collapse all

how to enable SCP in 3.0.1+

Jump to Best Answer
  • 1.  how to enable SCP in 3.0.1+

    Posted 12-04-2017 07:00 PM

    hello

    since i upgrade the ca pam from 2.8.3 to 3.0.1 (up to 3.0.2.1 now) , the ssh session does not have the scp plugin at all.

    when i review the documentation at here Access Methods - CA Privileged Access Manager - 3.0.2 - CA Technologies Documentation  ,, same configuration as 2.8.x ,, but on the device ,, (no drop down menu as in the documentation) see it yourself 

    what's wrong here ? what am i missing ? this check box does not enable the scp in the MidTerm ssh 

     

    thanks



  • 2.  Re: how to enable SCP in 3.0.1+
    Best Answer

    Posted 12-08-2017 09:19 AM

    Hello Wael,

    I could not reproduce the issue you have reported in my lab on PAM 3.0.2. - the Plugins menu is available in the SSH-Mindterm applet and I can launch the SCP-Applet.

    Can you try this procedure:

    1. Go to Global Settings and disable the "SSH Terminal File transfer" option.
    2. Try to connect through ssh to a target
    3. Renable the "SSH Terminal File transfer" option again.
    4. Try to connect to a target again

    Please also clear the PAM Client cache and the ControlPanel-Java/Browser cache should you use the Browser.

    Best Regards,
    Andreas Müller
    CA Technologies Support



  • 3.  Re: how to enable SCP in 3.0.1+

    Posted 12-08-2017 04:24 PM

    HI Andreas


    I already try this un check and recheack this option again and try the connection after each step , nothing changed
    this happened couple appliances (once at client POC, other time at my lab when  i tried to simulate

    0, the common thing between them that both are upgraded from 2.8.2 -> 2.8.3 -> 3.0 up to 3.0.2
    i haven't try this on directly a built appliance from 3.0

    and about trying to run from browser, all my browsers fail to load the "access" applet , so usually i am using the client.

     

    best regards



  • 4.  Re: how to enable SCP in 3.0.1+

    Posted 12-10-2017 04:36 PM

    Hi Andreas
    you were right, it was just client issue from the serveral upgrade processes, i uninstall the client and then install the recent version (3.0.2) directly ,, everything was ok and the plugins menu appeared

     

    thanks for your help