DX Application Performance Management

Expand all | Collapse all

Port mirror with HP ProLiant BL460c G8

  • 1.  Port mirror with HP ProLiant BL460c G8

    Posted 08-29-2016 05:46 PM

    Hello my friends,

     

    The TIM linux server that have been provisioned by the client is on the RHEV hypervisor, which in turn is in blades HP ProLiant BL460c G8, these servers are connected to the network via virtual connect, can you tell me according to the experience you have had on a similar infrastructure if you have captured the traffic from a port mirror.

     

    Thanks a lot,

     

    Henry.-



  • 2.  Re: Port mirror with HP ProLiant BL460c G8

    Posted 08-29-2016 06:35 PM

    Hello Henry,

    Our TIM SME JMertin wrote this article a few years back which should help:

    Running TIM inside a Virtual Machine 

     

    Please let us know if you have additional questions.

     

    Regards,

     

    Lynn



  • 3.  Re: Port mirror with HP ProLiant BL460c G8

    Posted 08-30-2016 03:44 AM

    Henry:

       I believe that you have a case on this as well grara06 owns it,

       Since this is a broader question, I am changing to a discussion. With APM 9.6 and later, we no longer specify hardware models whether for Virtual or physical environments. You can look at the compatibility guide and the install guide for your release for the minimum and recommended requirements supported There is also some guidance on virtual environments as well there.

     

    Thanks

    Hal German