Hello,
Here I'm posting the latest Knowledge Base Articles for CA Privileged Access Manager published or updated since 01-Oct-2016.
Windows Proxy fails to start on Windows Core 2008 R2 The 2.6 Windows Proxy was installed successfully on a domain controller running Windows Core 2008 R2.
Last Update: 2016-11-18 Size: 83 kb Type: Knowledge Base Articles ID: TEC1465084
Is there any procedure to upgrade the PAM releases?
This document will explain what you should be taking care before implementing an update.
Last Update: 2016-11-17 Size: 83 kb Type: Knowledge Base Articles ID: TEC1662318
After logging into CA PAM there is a message: "Bind Failure" "The following loopback addresses could not be loaded..."
This document describes what this message means, what effect it has to the user & some possible causes.
Last Update: 2016-11-15 Size: 83 kb Type: Knowledge Base Articles ID: TEC1116109
Can I create an RDP Transparent login script even if i cannot choose the fields by using the name in the Transparent Login Learning Tool ?
How to configure the Transparent Login Script even if it is not possible to choose an input field using the Transparent Login Learning Tool
Last Update: 2016-10-27 Size: 83 kb Type: Knowledge Base Articles ID: TEC1107777
Updating the password for an account in AD fails with errors 5759 and 1604 in the password update report. Still one can access the target device using that account. What happens ?
Password update error may fail with error 5759 and 1604 if the account OU or AD path has changed
Last Update: 2016-10-27 Size: 83 kb Type: Knowledge Base Articles ID: TEC1590723
In some servers we are not able to change the password and we are getting error codes 15520 and 5995 in reports. What is happening ?
Password aging policy conflicting with attempts at changing the password before the time comes may cause these errors to occur
Last Update: 2016-10-27 Size: 83 kb Type: Knowledge Base Articles ID: TEC1719862
Dirty COW Vulnerability
Is CA PAM vulnerable to the Linux Dirty COW vulnerability?
Last Update: 2016-10-25 Size: 83 kb Type: Knowledge Base Articles ID: TEC1236904
How do I find out who deleted a user from Password Authority?
A user was deleted and we needed to know who deleted that user.
Last Update: 2016-10-21 Size: 83 kb Type: Knowledge Base Articles ID: TEC1026242
How to configure the Schedule Backup for PAM with SCP and SFTP
This will guide you how to configure the PAM Schedule Backup feature using SCP and SFTP protocols.
Last Update: 2016-10-21 Size: 83 kb Type: Knowledge Base Articles ID: TEC1425573
What means the "Next Update" column in Config > Certificate Info?
When we go to "Config Certificate Info" there is a table with the following columns: Delete | Issuer | Next Update | Status | File Name | Distribution Point | Fail Reason Whats that "Next Update"?
Last Update: 2016-10-21 Size: 83 kb Type: Knowledge Base Articles ID: TEC1973309
How to configure the Schedule Backup for PAM with CIFS/NFS
This will guide you how to configure the PAM Schedule Backup feature using CIFS and NFS protocols.
Last Update: 2016-10-21 Size: 83 kb Type: Knowledge Base Articles ID: TEC1127973
Trying to use Putty as a service in 2.7 fails with error "X11 forwarding services are not permitted"
When configuring Putty as a TCP/UDP service, login to a remote device fails always with an X11 error, which did not happen in previous versions
Last Update: 2016-10-20 Size: 83 kb Type: Knowledge Base Articles ID: TEC1094676
How to find out the PAM Appliance MAC addresses
We need to identify MAC addresses on switch ports. How do we identify which MAC addresses are associated with which interfaces on the CA PAM hardware appliance?
Last Update: 2016-10-18 Size: 83 kb Type: Knowledge Base Articles ID: TEC1359482
Unable to create access policies for servers
When I click SAVE I get the error message: Message 20: Error occurred while trying to complete request. (76)
Last Update: 2016-10-14 Size: 83 kb Type: Knowledge Base Articles ID: TEC1568022
PAM RemoteCLI Error Message
We are attempting to utilize the CLI functionality in PAM, but after review all of the available documentation (limited), when we run the capam_command script we get error "Server returned HTTP response code: 403".
Last Update: 2016-10-11 Size: 83 kb Type: Knowledge Base Articles ID: TEC1640445
Tip: Why is port 8550 being queried when starting an RDP session & what effect does this have on the RDP session?
This tip explains why port 8550 is queried when starting an RDP session, the effect this has on RDP sessions starting & how to mitigate this effect.
Last Update: 2016-10-10 Size: 83 kb Type: Knowledge Base Articles ID: TEC1215493
How-To: Collect Java Trace Logs for CA PAM Issues
Step-by-step guide on how to collect Java trace logs to provide to CA Support for troubleshooting issues.
Last Update: 2016-10-10 Size: 83 kb Type: Knowledge Base Articles ID: TEC1383294
Use different Workflow settings for the same managed account
We need to manage a Linux account, but we need a user group that uses this account without an approval workflow, and another user group that uses the same account with a previous approval workflow. How can I get this scenario?
Last Update: 2016-10-07 Size: 83 kb Type: Knowledge Base Articles ID: TEC1159432
Command Filter List doesn't work
The command filter list works OK on Solaris 10 using the Bourne shell, but it doesn't work after changing to the bash shell during the session.
Last Update: 2016-10-07 Size: 83 kb Type: Knowledge Base Articles ID: TEC1351945