DX Infrastructure Manager

Expand all | Collapse all

cdm -customize Alerting

  • 1.  cdm -customize Alerting

    Posted 08-24-2015 11:52 AM

    Hi all,


      I want to disable certain alarms. like processor ,swap ,paging in cdm ...but still i need the metrics of these parameters .how to achieve this .pls help

  • 2.  Re: cdm -customize Alerting

    Posted 08-24-2015 04:29 PM

    You can do this using over riding the events with your custom events. For eg:


    if event A is creating the alert it would be something like this

    0x0000abcd E 50 A 2


    Here CA is trying to create the major alarm. Now if you over ride this event in custom directory as


    0x0000abcd E 50


    And reload the events. Now you will only see the event but no alarm.

  • 3.  Re: cdm -customize Alerting

    Posted 08-25-2015 10:02 AM

    We need to do in CDM probe itself.

  • 4.  Re: cdm -customize Alerting

    Posted 08-25-2015 10:16 AM

    All probes allow the option of collecting the performance metric and/or generating an alert. You should be able to just unselect the Enable Alarm options in the CDM probe for the metrics you don't want alarms.

  • 5.  Re: cdm -customize Alerting

    Posted 08-25-2015 10:25 AM

    Thanks ...can u share the snap where to edit .

  • 6.  Re: cdm -customize Alerting

    Posted 08-25-2015 06:27 PM

    CPU and Memory QOS are under the advanced tab in the CDM probe. You'd also need to uncheck the thresholds (if any are set) under the status tab.


    For disk, you would double click the drive on the Status tab, and uncheck the High and Low Threshold Settings, and select the "on Disk Usage.." options in the Quality of Service message section.

  • 7.  Re: cdm -customize Alerting

    Posted 08-25-2015 08:35 PM

    if you are using Admin Console, you will want to make the checkpoint look like this: