Hi All,
How to automatically monitor the available partitions in cdm .As of now we used to enable each partition which we need to monitor .There is anyway to enable monitoring for all partition when the device added.
Thanks!
https://na4.salesforce.com/articles/HowToProcedures/How-to-enable-cdm-to-automatically-monitor-new-disks?popup=true
I have edited the below in fixed default in cfg,but still the disks are not auto enabled
<disk>
<fixed_default>
active = yes
qos_disk_usage = yes
qos_disk_usage_perc = yes
Try removing the disks from the probe configuration and then deactivating->reactivating the probe.