Clarity

  • 1.  Maximum XML Nodes

    Posted Nov 06, 2014 10:14 AM

    In Clarity 13.3 we encountered some issues in a process where larger Project Instances are xogged out and in, the issue was regarding the new "feature" Maximum XML Nodes. We have dissabled this using -1 and restarting the servers but we are still seeing the issue regarding the system configuration of the maximum xml nodes. Any ideas if this is a defect or what else can be done?



  • 2.  Re: Maximum XML Nodes
    Best Answer

    Posted Nov 06, 2014 10:21 AM

    Hello,

     

    Instead of -1 , try to put some maximum number. Here are some recommendations.

    xml nodes.png

     

    Regards

    Chandrani



  • 3.  Re: Maximum XML Nodes

    Posted Nov 06, 2014 11:57 AM

    Thanks for sharing this Chandrani

     

    NJ



  • 4.  Re: Maximum XML Nodes

    Posted Nov 06, 2014 01:28 PM

    Thanks.

    Is this documented somewhere?



  • 5.  Re: Maximum XML Nodes

    Posted Nov 06, 2014 02:17 PM

    The known issue of disabling it is found here

    Change Impact and Upgrade Guide - On Premise Release 13.3.00

     

    Basically States

    Using the Value -1 to Disable the New XOG Governor Limit Does Not Work Correctly for XOG Write

    Setting the Maximum XML Node Limit value to -1 in CA Clarity System Administration disables the XOG Governor limit. Currently, entering this value causes XOG write operations to throw the following error:

    XOG-9060: The system cannot import this instance with the current configuration. Increase the 'Maximum XML Nodes' value in the CSA and try again. 

    Workaround: Set the Maximum XML Node Limit to 10^15.



  • 6.  Re: Maximum XML Nodes

    Posted Nov 06, 2014 02:33 PM

    Yes.

    This information is present in XML Open Gateway Developer Guide.

     

    Namita



  • 7.  Re: Maximum XML Nodes

    Posted Nov 06, 2014 04:05 PM

    Thanks



  • 8.  Re: Maximum XML Nodes

    Posted Aug 25, 2016 12:59 PM

    Thank you