DX Infrastructure Manager

Expand all | Collapse all

Edit Monitoring Templates missing

Jump to Best Answer
  • 1.  Edit Monitoring Templates missing

    Posted 01-30-2015 03:56 PM

    Hi,

    I have ca uim 8.0, the edit monitoring templates acl is enabled on the administrator user, but when I login to the web interface the tab is missing...any help?

    thanks



  • 2.  Re: Edit Monitoring Templates missing

    Posted 01-30-2015 04:51 PM

    If you're talking about SOC, then those have been removed many versions ago.. like after 6 or something.

     

    -jon



  • 3.  Re: Edit Monitoring Templates missing

    Posted 02-02-2015 01:05 PM

    Hi, thanks for the reply.

    No I am talking about the possibility to create a monitoring template for example for all the windows machine with more than one probe.

    In the manual is written I should find it in the web console but it is not.

     



  • 4.  Re: Edit Monitoring Templates missing

    Posted 02-02-2015 01:29 PM

    Any change you could link to this manual? I'm not sure what you are
    referring to either, and as far I know, the old templating thing is
    dead. And I can no longer find it in the USM portlet (where it used to
    be).

     

    Ment to be replaced by a new tool in the not too distant future.

     

    It seems very likely they forgot to remove it from the documentation.



  • 5.  Re: Edit Monitoring Templates missing

    Posted 02-02-2015 02:23 PM


  • 6.  Re: Edit Monitoring Templates missing
    Best Answer

    Posted 02-02-2015 04:12 PM

    Yep, that is dead these days and will be replaces in the future by policy based configuration. It is still in the documentation because it can be enabled (don't remember where), but it is not recommended (if I remember correctly). You'll probably find an article about it in the customer portal.

     

    -jon



  • 7.  Re: Edit Monitoring Templates missing

    Posted 02-03-2015 10:18 AM

    thanks !