The Water Cooler

Expand all | Collapse all

How to configure BRODCOM LB for public(static) IP

  • 1.  How to configure BRODCOM LB for public(static) IP

    Posted 02-21-2019 08:54 AM

    Hi All,

     

    We are using brocade load balancer to manage traffic for our application servers. The load balancer is having VIP binded with its Public IP.

     

    We have configured the traffic on VIP for https by creating internal DNS and ssl certificate for same and the overall traffic is working fine. Because of this configuration the application is accessible within organisation.

     

    Now we want make this application accessible from internet by exposing it over internet but not able to configure the same, so need help in configuration of traffic for application access on public ip binded with lb VIP of load balancer.

     

    The DNS and SSL are registered for public IP which will be needed in this configuration.

     

    We are having 2 physical nodes of load balancer along with VIP as 10.xx.xx.xx and Public ip as 21x.**filtered**.**filtered**.**filtered**.


    #TheWaterCooler


  • 2.  Re: How to configure BRODCOM LB for public(static) IP

    Posted 02-21-2019 09:00 AM

    @vishalkhankar 

     

    there are no Load Balancer from Broadcom available.

     

    I assume you mean old Brocade ADX ?


    #TheWaterCooler


  • 3.  Re: How to configure BRODCOM LB for public(static) IP

    Posted 02-21-2019 09:07 AM

    Yes, its Brocade Virtual Traffic Manager SSC 10.4r1


    #TheWaterCooler


  • 4.  Re: How to configure BRODCOM LB for public(static) IP

    Posted 02-21-2019 09:11 AM

    @vishalkhankar 

     

    vTM was acquired by PulseSecure.

     

    Please post such question on they Community


    #TheWaterCooler


  • 5.  Re: How to configure BRODCOM LB for public(static) IP

    Posted 02-21-2019 09:07 AM
    Yes, its Brocade Virtual Traffic Manager SSC 10.4r1
    #TheWaterCooler