Ethernet Switches Community

Expand all | Collapse all

BCM53134 IMP port as a regular port

Jump to Best Answer
  • 1.  BCM53134 IMP port as a regular port

    Posted 03-30-2017 03:35 AM

    How to configure BCM53134 to use port8/IMP as a regular port?

    Thanks in advance,

    Paulo Ribeiro


    #EthernetSwitchesCommunity


  • 2.  Re: BCM53134 IMP port as a regular port

    Posted 03-30-2017 10:25 PM

    Hi,

    It requires to configure the 53134 IMP port as below for a regular port.

    1. set Reg(0x00: 0x0b)=0x06

    2. set Reg(0x00: 0x0e)=0x8b to force IMP link up at 1000Mbps for example.

    2. set Reg(0x00: 0x22)=0x0040

    Thanks,

    Ryan


    #EthernetSwitchesCommunity


  • 3.  Re: BCM53134 IMP port as a regular port

    Posted 03-31-2017 03:55 AM

    Hi,

    In BCM53134 Register Programming Guide (53134-PR101-R, 2016 Jan 29) there is no register 0x22 in page 0x00.

    Could you please confirm the required configuration to use IMP port as a regular port?

    Am I using a deprecated edition of the register programming guide?

    Thank you,

    Paulo


    #EthernetSwitchesCommunity


  • 4.  Re: BCM53134 IMP port as a regular port

    Posted 03-31-2017 08:42 PM

    Hi,

    This internal register Reg(0x00: 0x22) is required for IMP port as unmanaged mode regular port usage, it is to enable IMP port forwarding in unmanaged mode operation.

    We are updating the PR doc and will add this register information in PR doc.

    Thanks,

    Ryan


    #EthernetSwitchesCommunity


  • 5.  Re: BCM53134 IMP port as a regular port

    Posted 04-03-2017 09:27 AM

    Hi Ryan,

    For when do you foresee the new release of the BCM53134’s PR doc?

    Thanks,

    Paulo


    #EthernetSwitchesCommunity


  • 6.  Re: BCM53134 IMP port as a regular port

    Posted 04-04-2017 10:48 PM

    Hi Paulo,

    We are working on it and plan by end of April.

    Thanks,

    Ryan


    #EthernetSwitchesCommunity


  • 7.  Re: BCM53134 IMP port as a regular port
    Best Answer

    Posted 04-19-2017 11:01 PM

    Hi Paulo,

    The PR doc has been updated to PR103 and posted.

    Please double check it.

    Thanks,

    Ryan


    #EthernetSwitchesCommunity