In a recent set of San Health results recieved from Broadcom/Brocade, four of my Emulex HBAs are reporting there desciption as Vixel Switch or Hub. Also San Health Professional reports the same result for these HBA. The Device type being reported is a DISK. Any ideas why these HBAs are being labeled in this way?
What does the Name Server show for these HBAs?
I've had some odd inter-naming before. When the HBAs were updated, the naming stabilized. I'd check there first if possible.
There would seem to be some decoding fault in the OUI of the device.
Go here: https://metacpan.org/pod/Device::WWN
And put in the WWN of the device which is reporting wrong. See what the IEEE folks have to say about the registration status. May be with the SAN Health decoding or may be with the vendor WWN assignment.
I cannot get this link to work https://metacpan.org/pod/Device::WWN It just gives me blank screens. If it is script, my security settings may be blocking it. Emulex bought Vixel a number of years ago, so they may be using vixels old OUIs. One Emulex LPe16002 HBAs has the following OUI that is part of the WWNN that I am having decode problems with:
The OUI is 00-10-9B. Which is part of this entire WWNN 20:00:00:10:9b:23:28:20.
Can you use the Link you and tell me what you get back as a reponse? Thanks,- Steve