Brocade SAN Health Community

Expand all | Collapse all

SAN Health reporting Duplicate WWN

Jump to Best Answer
  • 1.  SAN Health reporting Duplicate WWN

    Posted 12-13-2017 08:43 AM

    Hi,

     

    When i ran the SAN Health (Version  4) on SAN Ports tab i can see it reports as Duplicate WWN under port world wide name tab. I can see that those ports are not duplicate and unfortunately i can see the duplicate WWN's for the ports where there ports are offline.Last week whe i ran the report it was not evident bit yes this week i saw this. We didnt do any changes in the environment. I guess this might be the bug on the version but am not sure. Please let me know if you have came acorss this scenario or any information regarding this issue.

     

    Switches firmware version isv7.4.1e.

     

    Thank you and appreciate your help.

     

     

    S11/P29 16 G   Emulex HBA SRV_TEST_HOST02       DuplicateWWN98_0e:69:26 No Device Connected


    #sanhealth
    #BrocadeSANHealthCommunity
    #fiber


  • 2.  Re: SAN Health reporting Duplicate WWN

    Posted 12-15-2017 07:48 AM

    Hi Brocade Savys,

     

    If you have come across this scenarios please do let me know or let me know if need to contact support.


    #BrocadeSANHealthCommunity
    #sanhealth


  • 3.  Re: SAN Health reporting Duplicate WWN
    Best Answer

    Posted 01-02-2018 07:08 PM

    There was a bug in the report genertors that was causing this.  It's resolved now, if you want to correct any reports that had this issue, just send the BSH file in again and new reports will be generated.


    #BrocadeSANHealthCommunity