Brocade Management Software Community

Expand all | Collapse all

SNMP Error : Discovered: Not registered for SNMP Traps

  • 1.  SNMP Error : Discovered: Not registered for SNMP Traps

    Posted 01-20-2019 10:08 AM

    I have two BNA server where the same fabric is configured.  The 2nd one is newly added and I have updated the new server IP address under snmpv3.  But on the BNA am getting  the error  " Discovered: Not registered for SNMP Traps "

     

    How to fix this ?

     

     

    Name Discovery Status Last Discovery Time User ID Communication Protocol Community String
    be10gxXxX309 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:23 EST 2019 admin HTTP *****
    be10gxXxX310 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
    be10gxXxX311 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****
    BE10GxXxX312 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
    BE10GxXxX313 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:24 EST 2019 admin HTTP *****
    BE10GxXxX314 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:25 EST 2019 admin HTTP *****
    be10gxXxX315 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****
    be10gxXxX316 Discovered: Not registered for SNMP Traps Sun Jan 20 13:00:21 EST 2019 admin HTTP *****

     

     


    Switch_Name:User> snmpconfig --show snmpv3

    SNMP Informs = 0 (OFF)

    SNMPv3 USM configuration:
    User 1 (rw): snmpadmin1
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 2 (rw): snmpadmin2
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 3 (rw): snmpadmin3
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 4 (ro): snmpuser1
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 5 (ro): snmpuser2
    Auth Protocol: noAuth
    Priv Protocol: noPriv
    User 6 (ro): snmpuser3
    Auth Protocol: noAuth
    Priv Protocol: noPriv

    SNMPv3 Trap/Informs configuration:
    Trap Entry 1: 10.237.144.22
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)
    Trap Entry 2: 10.210.1.153
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)
    Trap Entry 3: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 4: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 5: No trap recipient configured yet
    Notify Type: TRAP(1)
    Trap Entry 6: No trap recipient configured yet
    Notify Type: TRAP(1)
    Switch_Name:User>

     

     

     

     


    #configuration
    #brocade
    #BrocadeManagementSoftwareCommunity
    #snmp
    #CMCNE
    #bna


  • 2.  Re: SNMP Error : Discovered: Not registered for SNMP Traps

    Posted 01-20-2019 10:16 PM

    @k_saul 

     

    --->>>I have two BNA server where the same fabric is configured. 

     

    OK.

     

    then you wrote:

     

    --->>>The 2nd one is newly added and I have updated the new server IP address under snmpv3.

     

    did you have configured on switch side with the command snmpconfig the desination trap IP ?

     

    AFAIK; and I've never tested such a config - it is not possible to add multiple IP Trap.


    #BrocadeManagementSoftwareCommunity


  • 3.  Re: SNMP Error : Discovered: Not registered for SNMP Traps

    Posted 01-20-2019 11:18 PM

    Yes, I have added both the IP's 

     

     

    SNMPv3 Trap/Informs configuration:
    Trap Entry 1: 10.237.144.22
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)
    Trap Entry 2: 10.210.1.153
    Trap Port: 162
    Trap User: snmpadmin1
    Trap recipient Severity level: 4
    Notify Type: TRAP(1)


    #BrocadeManagementSoftwareCommunity