Brocade Management Software Community

Expand all | Collapse all

SNMP OID for configured Virtual Fabrics IDs

  • 1.  SNMP OID for configured Virtual Fabrics IDs

    Posted 07-26-2013 02:29 AM

    Good morning,

    is there any OID to "walk" through, with the virtual fabrics configured in a chassis?

    We have some DCXs, with several VFs:

    Created switches:  128(ds)  61  63  65 

    ...omitted output....

    I need to get this same information (128, 61, 63, 65... or any other) using an snmpget o walk.

    The problem is that I can't find this information in the "Fabric OS MIB Reference v7.0.0"...

    Does someone know if it's possible to get this info using OIDs??

    Thanks in advance!


    #BrocadeManagementSoftwareCommunity


  • 2.  Re: SNMP OID for configured Virtual Fabrics IDs

    Posted 08-06-2013 05:11 PM

    Hi Alejandro,

    Well, not exactly.  The VF information has been added the appropriate Event Groups depending on how it best fits.  I copied a couple of examples out of the MIB reference guide below:

    For the SW group:

    From Fabric OS v6.2.0, the sw traps will have an extra binding associated to indicate the Virtual Fabric (VF). The traps will have a Virtual Fabric ID (VFID) associated with them.

    For the Event Group there is the following object:

    swEventVfid

    1.3.6.1.4.1.1588.2.1.1.1

    .8.5.1.6

    This object identifies the Virtual Fabric ID.

    I hope the above helps out a bit.


    #BrocadeManagementSoftwareCommunity


  • 3.  Re: SNMP OID for configured Virtual Fabrics IDs

    Posted 08-06-2013 10:51 PM

    Also oid .1.3.6.1.4.1.1588.2.1.1.1.2.15 will tell you the vfid.

    .1.3.6.1.4.1.1588.2.1.1.1.2.16 contains vfname

    But for those 2 you already have to direct your SNMPv3 get to context=vfid, if I remember correctly.

    Martin's suggestion is based on the eventtable, which contains event generated by the chassis/VF/LS/?.

    And as I understand alajandro, the goal is to get a table/list of VF present in the chassis when querying the device on SNMP.

    If its'based on the eventtable then each VF should report a event on a regular basis to stay current.

    Unfortunately I'm unaware of a single SNMP get on a OID that will list you all VFid's.


    #BrocadeManagementSoftwareCommunity