Brocade Management Software Community

Expand all | Collapse all

Facing issue during BNA installation - There is no Switch

  • 1.  Facing issue during BNA installation - There is no Switch

    Posted 12-11-2015 02:27 AM

    Hello,

    I'm on a 2008 R2 server.

    After installing the 11.1.1 BNA, the wizard configuration start.

    when I get on the internal or external FTP Server tab.

    I get the error below :

         * There is no switch - Server IP Configuration adress available. The wizard will quit now and the configuration closed.

     

    Somebody has already met this problem ?
    If yes it is possible to help me please.

    Thank you

     

     

     

     

     


    #BrocadeManagementSoftwareCommunity


  • 2.  Re: Facing issue during BNA installation - There is no Switch

    Posted 12-11-2015 12:45 PM

    A couple of things:

     

    1/ 11.1.1 is quite old. Is there a reason you're using such an old version? 12.4.2 is the current version, and I strongly recommend using that instead.

     

    2/ Is your Windows 2008 R2 server connected to the network? BNA is looking for a valid IP address that will be used when communicating to/from the switches - for example, the IP a switch will use for a TFTP server when it is uploading its backup configuration file. Does your server have a network connection, connected to the network, with a valid IP address?


    #BrocadeManagementSoftwareCommunity