Brocade Management Software Community

Expand all | Collapse all

BNA 12.4. Multipath Check

  • 1.  BNA 12.4. Multipath Check

    Posted 08-24-2015 02:04 AM

    Hello Guys,

     

    I've enabled the Multipath-Check in the Configuration Policy Manager.  On the ESXi servers i got this error:

     

    Multipath Check - Configuration Policy Manager Report

    Unknown

    Failed to check due to: com.brocade.dcfm.vm.common.domain.HostConnectionCheckResult

     

    Any idea what's missing on the ESXi? CIM Providers or something?

     

    regards,

     

    Michael


    #BrocadeManagementSoftwareCommunity


  • 2.  Re: BNA 12.4. Multipath Check

    Posted 10-07-2015 01:44 AM

    I have the  same issue. Any  workarounds available ?


    #BrocadeManagementSoftwareCommunity


  • 3.  Re: BNA 12.4. Multipath Check

    Posted 10-16-2015 02:30 AM

    There is a problem with the CIM providers, the host discovery over CIM providers also fails. I Installed the actual Emulex providers on the ESXi, re-enable SSLv3 but nothing works... 

    I will open a case at my support partner...


    #BrocadeManagementSoftwareCommunity


  • 4.  Re: BNA 12.4. Multipath Check

    Posted 11-10-2015 03:55 AM

    Did this issue ever get resolved?  I am having the same issue so I am quite curious ;-)


    #BrocadeManagementSoftwareCommunity


  • 5.  Re: BNA 12.4. Multipath Check

    Posted 11-10-2015 04:10 AM

    issue not resolved -.-

    I have no idea why this won't work... maybe someone with support directly at brocade can open up a case?


    #BrocadeManagementSoftwareCommunity