Hello everyone,I´m new user with Network Advisor and i´m try to use "firmware management" but i cant (i attach the error). I cant access via web too.Someone can help me with this?Thanks
I see, the VM have different IP 172.28 as the switch with IP 172.20
--->>> I cant access via web too.
most probable is web-management not configured
Telnet to the switch, at the prompt
ICX6430>enable - press enter -
ICX6430#conf term - press enter
ICX6430(config)#web-management ? - you see all operands - and set wm to enable
about FW upgrade, I would suffest to use TFTP instead BNA.
HI Antonio,This IP (172.28.1.14) is the Esxi, not the VM. The vm is 172.20.4.230 and the switch is 172.20.2.30. Is not network problem because Network is 172.20.0.0/16.
I dont understand why me tell cant access http://172.20.4.230:443 when that IP is the Network Advisor server and the switch want upgrade is 172.20.2.30
BNA use for FW Upgrade a TFTP and use by default Port 69, - for FOS and NOS Upgarde the FTP.
Port 443 is not a port for FW upgrade.
see here Figure 11
it show to me as you have miss config on BNA.