Brocade Management Software Community

Expand all | Collapse all

Switch in unreachable status in BNA but can be reached vi direct telnet

  • 1.  Switch in unreachable status in BNA but can be reached vi direct telnet

    Posted 10-14-2018 06:04 AM

    Hi

    I have a Fabric with 5 FC switches, One on them is shown as unreachable via BNA , but when I connect to it directly everything is up and running. I tried to rediscover but still, the status remains the same. The switch role is Principal. Any idea how to solve this? I do not want to reboot the switch...

    Thanks

     

     


    #BrocadeManagementSoftwareCommunity


  • 2.  Re: Switch in unreachable status in BNA but can be reached vi direct telnet

    Posted 10-14-2018 09:30 AM

    @ErezR

     

    most probable you are out of range with FOS, Switch Type/Model or BNA

     

    post here exact, FOS Rel. BNA Version and Switch you want to discovery


    #BrocadeManagementSoftwareCommunity


  • 3.  Re: Switch in unreachable status in BNA but can be reached vi direct telnet

    Posted 10-15-2018 01:27 AM

    The fabric includes 5X 6510. 7.0.2a

    status of 4 of them is shown as ok via BNA

    1 is unreachable via BNA

    all of them was in status ok until a few days ago when one of them is shown as unreachable.

    I can telnet to the switch directly and everything is working on it just can't communicate with him vi BNA (14.2.2)


    #BrocadeManagementSoftwareCommunity