Brocade Management Software Community

Expand all | Collapse all

How can I see if an user does a change of configuration in an ICX switch using BNA?

  • 1.  How can I see if an user does a change of configuration in an ICX switch using BNA?

    Posted 10-18-2017 11:04 AM

    Hi,

     

    I would like to know who and when do changes of configuration on switches ICX. I am using BNA solution for monitoring of LAN by SNMP. What do I need to configure for see this kind of information?


    #BrocadeManagementSoftwareCommunity


  • 2.  Re: How can I see if an user does a change of configuration in an ICX switch using BNA?

    Posted 10-30-2017 04:18 PM

    Juan,

    I am not very familiar with BNA so I do not know if this is the right way to do it.

     

    I know you can configure the ICX switches to report SNMP events to the BNA console, one of the events is a telnet/ssh login and the event includes the source IP address and another event is a change to the startup configuration. You should be able to program BNA to send you an email when one of them happens or just check the event log for the device.

     

    Hopefully someone else may have a more complete answer!

    Mark


    #BrocadeManagementSoftwareCommunity