Brocade Fibre Channel Networking Community

Expand all | Collapse all

Do you have the ability to restrict access to the management port (s) to a range of IP addresses on a Brocade 6510 FC Switch and if so how please

  • 1.  Do you have the ability to restrict access to the management port (s) to a range of IP addresses on a Brocade 6510 FC Switch and if so how please

    Posted 06-25-2015 06:59 AM

    Can anybody answer the below question? 

     

    Do you have the ability to restrict access to the management port (s)  to a range of IP addresses on a Brocade 6510 FC Switch and if so how please


    #switch
    #fc
    #urgent
    #BrocadeFibreChannelNetworkingCommunity
    #access
    #port


  • 2.  Re: Do you have the ability to restrict access to the management port (s) to a range of IP addresses on a Brocade 6510 FC Switch and if so how please

    Posted 06-25-2015 08:02 AM

    I think "ipfilter" should still work. But have a look into the CLI guide, before you make experiments. It's a kind of initiation ritus for a new SAN admin to be asked by colleagues to set up the ipfilter and then have to go to the machine with a serial cable after screwing it up :smileytongue:


    #BrocadeFibreChannelNetworkingCommunity